Intended Use - SQlab Ergolux Mode D'emploi

Intended use

The different models of the SQlab ERGOLUX® series are designed for the different areas of application of travel, everyday, city and trek-
king cycling and have undergone numerous testing procedures. An overload and damage to the saddle is determined by the nature of
the surface being ridden on, riding ability, riding style, weight or the total system weight and other special events, such as riding errors,
falls and accidents. In the description the intended use, we follow the international categorization ASTM F2043-13/ DIN EN 17406, which
defines the different fields of application as precisely as possible.
Model name
SQlab 610 ERGOLUX ® (2.0) Saddles
SQlab 610 ERGOLUX (2.0) active Saddles
®
SQlab 602 ERGOLUX (2.0) Saddles
®
SQlab 601 ERGOLUX
®
SQlab 621 ERGOLUX (2.0) Saddles
®
SQlab ERGOLUX saddles are to be used exclusively on bicycles under the conditions of their corresponding category according to ASTM
®
F2043-13/ DIN EN 17406 or a lower category.
Category 1 according to DIN EN 17406
Refers to bicycles and EPACs used on normal paved surfaces on which the tires are intended to maintain
ground contact at average speed, with occasional drops.
Average speed in km/h
Maximum drop/jump height
Intended use
Bike type
Category 1 according to ASTM F2043-13
Bicycles/add-on components in this category must only be used on tarred or paved roads and paths on which
the wheels have permanent ground contact.
Deployment category ac-
Maximum rider weight
cording to ASTM F2043-13
100 kg Category 3
100 kg Category 3
130 kg Category 2
130 kg Category 1
130 kg Category 1
15 - 25
< 15
Commuting and recreational riding.
City & Urban Bikes
Deployment category ac- eBike Ready
cording to DIN EN 17406 Label
Category 3 Yes
Category 3 Yes
Category 2 Yes
Category 1 Yes
Category 1 Yes