SQlab 611 ERGOWAVE Manuel De L'utilisateur page 40

Warning
NOT
OK
NOT
OK
NOT
OK
Mounting for Tripod seat post.
Clamping of the saddle frame with non-opposing clamping
jaws or clamping surfaces is to be avoided in all cases.
Otherwise, the saddle frame is subjected to a bending stress
that can lead to premature failure or sudden breaking during
use and thus to an accident.
Assembly of the SQlab ERGOWAVE ® saddle using a so-called
saddle block should be avoided. The clamping surfaces are
usually unfavourably short and small, so that reliable clamping
of the saddle without damaging the saddle frame cannot be
guaranteed.
This may lead to an impairment of product safety and damage
with consequent breakage. The saddle frame may suddenly
and unexpectedly break during use and an accident could
occur.
The 6OX Trial has no seatstays, therefore the mounting in con-
ventional seatposts is NOT possible.