Ebike Ready - SQlab 611 ERGOWAVE Manuel De L'utilisateur

eBike Ready

SQlab products with the eBike Ready label are suitable for use on pedelecs in their respective ASTM F2043-13/ DIN EN 17406 category
from the point of view of function, ergonomics and operational stability (in accordance with the DIN EN ISO 4210 and DIN EN ISO 15194
standards).
The SQlab Label eBike Ready refers exclusively to the use on pedelecs with pedal assistance up to 25 km/h. The eBike Ready label can
be found on the packaging, the user manual and the product page of your SQlab product
Replacing SQlab ERGOWAVE® saddles on Pedelec25
E-bikes and pedelecs with CE mark and pedal assistance up to 25 km/h are covered by the Machinery Directive, therefore components of
these bicycles may not be easily replaced or modified. In order to clarify the situation, a guideline for replacing E-bike/Pedelec 25 parts
has been jointly released by the associations Zwerad-Industrie-Verband (ZIV) and Verbund Service und Fahrrad (VSF) in cooperation with
the Zedler-Institut and the Bundesinnungs- band Fahrrad (BIV).
The guideline clearly regulates which bicycle dealers and repairers are allowed to replace parts on these vehicles and for which parts
they require approval from vehicle manufacturers or system suppliers. As such, it can be regarded as a recommended course of action.
Replacing the ERGOWAVE® saddles bearing the eBike Ready rating on a Pedelec25 is possible based on the recommendations of the
"Guidelines for the replacement of components in CE-marked e-bikes/pedelecs with pedal assistance up to 25 km/h" of the Zweirad-In-
dustrie-Verband (ZIV) and Service and Bicycle Association (VSF) in cooperation with the Zedler-Institut and the Bundesinnungsverband
Fahrrad (BIV), provided the displacement towards the rear to the series/original use area is not greater than 20 mm. A changed load
distribution beyond the intended adjustment range may cause critical steering characteristics. The length of the seat stays on the saddle
frame and the saddle shape also play a role.
On our website www.sq-lab.com/service/downloads/ in the service area under Downloads you will find a document called eBike Ready.
There you will find detailed information about the component exchange on Pedelec25, as well as the guide for the component exchange
made by the associations Zweirad-Industrie-Verband (ZIV), Verbund Service und Fahrrad (VSF), the Zedler Institute and the Bundesin-
nungsverband Fahrrad (BIV).
Replacing SQlab ERGOWAVE® saddles on Pedelec45
Component replacement of the SQlab ERGOWAVE® saddles bearing the eBike Ready rating on fast pedelecs, so-called S-Pedelec, which
are classified as motor vehicles and are subject to EU Directive 2002/24 / E6 or EU Regulation No. 168/2013, is possible based on the
guideline " Component repla cement on S-pedelecs - fast e-bikes / pedelecs with a pedal assist up to 45 km / h" of the German Associa-
tion of the German Bicycle Mechanic (BIV), TÜV Rheinland, velotech.de, Association Service and Bicycle (VSF), Zedler- Institute and the
Zweirad-Industrie-Verband (ZIV), provided that the offset to the rear of the standard/original functional area is not greater than 20 mm. A
changed load distribution beyond the intended adjustment range may cause critical steering characteristics. The length of the seat stays
on the saddle frame and the saddle shape also play a role.
On our website www.sq-lab.com/service/downloads/ in the service area under Downloads you will find a document called eBike Ready.
There you will find detailed information about the component exchange on Pedelec45, as well as the guide for the component exchange
made by the associations Zweirad-Industrie-Verband (ZIV), Verbund Service und Fahrrad (VSF), the Zedler Institute and the Bundesin-
nungsverband Fahrrad (BIV).