Transport; Functional Description - Abicor Binzel xFUME FLEX Mode D'emploi

Dispositif d'aspiration de fumée de soudage à vide faible
Masquer les pouces Voir aussi pour xFUME FLEX:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

5 Functional description

4.1 Transport

Although the items delivered are carefully checked and packaged, it is not possible to fully rule out the risk of
transport damage.
Goods-in inspection
In case of complaints
Packaging for returns Where possible, use the original packaging and the original packaging material. If you have
Tab. 5
Transport
4.2 Storage
For ambient conditions for storage in a closed environment see:
 Tab. 3 Ambient conditions for transport and storage on page EN-7
5 Functional description
Fig. 2
Functional description
The xFUME FLEX is part of a welding, cutting and grinding system. Welding fumes, which are hazardous to health, are
generated during welding and grinding, and during laser and plasma cutting. The fumes are filtered and cleaned by the
filters inside the welding fume extraction system. Welding fumes are extracted through an extraction hood and hose system
and then forced through filter elements. The standard configuration of the welding fume extraction system has a pre-filter and
a primary filter. The pre-filter removes coarse dirt particles from the extracted welding fumes. Fine dirt particles are removed
by the primary filter. The dirt particles adhere to the surface of the filter material, which causes the intake pressure on the fan
to increase. The cleaned air is then returned via an air exhaust louver.
The welding fume extraction system can be operated with a flexible extraction arm with a length of two, three, or four meters.
The device corresponds to the welding fume separation class H13.
EN - 8
Use the delivery note to check that everything has been delivered.
Check the delivery for damage (visual inspection).
If the delivery has been damaged during transport, contact the last carrier immediately.
Retain the packaging for potential inspection by the carrier.
questions concerning packaging and safety during shipment, please consult your supplier,
carrier or transporter.
xFUME FLEX
BAL.0733.0 • 2021-01-11

Publicité

Table des Matières
loading

Table des Matières