Software Update; Replace The Sim Card - Eaton xChargeIn A Serie Manuel D'installation

Maintenance
10.3

Software update

It is recommended to always keep the charging station up-to-date, as it con-
tains functional enhancements and bug fixes. A software update is available
on the Eaton website:
http://www.eaton.com/evc
The information and instructions for the current software update from the as-
sociated release notes must also be observed.
To perform the software update via USB or the network connection to
xChargeIn A Series, X Series and S Series, the instructions are included in
the *.zip file. For xChargeIn M Series, the configuration manual must also be
observed.
Information
A software update process on the charging station is indicated by a slow or-
ange flashing of the LED bar.
10.4

Replace the SIM Card

To replace the SIM card, proceed as follows:
1) Remove the existing SIM card from the GSM module (see
2) Insert the new SIM card into the GSM module (see
50
ing the SIM card).
SIM card).
xChargeIn
8.2.2 Remov-
8.2.1 Inserting the
Installation manual V1.01
© EATON