Safety Notes - Eaton xChargeIn A Serie Manuel D'installation

Safety notes

2 Safety notes
WARNING!
Risk of electric shock and fire hazard!
● Installation, commissioning, maintenance or retrofitting of the charging
● Do not install or use a damaged device.
● A damaged charging station must be taken out of commission and re-
● A repair of the charging station is not permitted and may only be carried
● No unauthorized modifications and modifications may be made to the
● No markings (such as safety signs, warnings, wire markings ...) may be
● Never use faulty, worn-out or dirty charging connectors.
● The connection of cable extensions to the charging station's charging
1)
Persons who, due to their special training, expertise and experience as
well as knowledge of current standards, are able to assess the work per-
formed and the possible hazards.
12
station must be performed by correctly trained, qualified and authorized
1)
electricians who are fully responsible for the compliance with existing
standards and installation regulations.
Please observe that an additional overvoltage protection can be required
by vehicles or national regulations.
Also observe that some countries or vehicle manufacturers may require
a different triggering characteristic of the fault-current circuit breaker
(Type B).
paired or replaced by a qualified and authorized electrician.
out by the manufacturer.
charging station.
removed from the charging station.
cable is not permitted.
xChargeIn
Installation manual V1.01
© EATON