Options; Rfid; Key Switch; Gsm (Only Xchargein M Series) - Eaton xChargeIn A Serie Manuel D'installation

Description of the charging station
4.6

Options

This chapter lists the possible options of the charging station.
4.6.1

RFID

The RFID reader is used for the non-contact authorization of a charging
process with MIFARE cards or tags according to ISO 14443 and ISO 15693.
Fig. 4-8: RFID
4.6.2

Key switch

The key switch is used for authorizing a charging process with a key.
Fig. 4-9: Key switch
4.6.3 GSM (only xChargeIn M Series)
In order to be able to communicate with a higher-level OCPP backend in a
charging network, the charging station can optionally be equipped with a
GSM module.
20
1 ... RFID reader
1 ... Key switch
xChargeIn
Installation manual V1.01
© EATON