Prepare Gsm Connection (Optional) - Eaton xChargeIn A Serie Manuel D'installation

Configuration
Activation communication - DSW2.5
DIP switch
DSW2.5
Commissioning mode - DSW2.8
DIP switch
DSW2.8
8.2

Prepare GSM connection (optional)

Certain device variants have a GSM module. To use the GSM function, a
SIM card must be inserted in the GSM module.
Fig. 8-19: Insertion slot
42
Function
Activation of communication in the charging
network.
This DIP switch setting must be made for each
master and slave charging station to enable
charging station communication.
Function
Activate commissioning mode.
For details, see 9.1 Activating/deactivating
commissioning mode.
xChargeIn
Illustration
Illustration
Installation manual V1.01
© EATON