Individual Presets; User Presetting (U1-U0); General Training Program - Kettler SM 9150-75 Mode D'emploi Et Instructions D'entraînement

Training and operating instructions
28
GB

Individual presets

User presetting
(U1 / U2 / U3 / U4 / U0)
The personal data can be saved for up to four diffe-
rent users and recalled when restarting the machine.
The individual training program can therefore be
used by four different people over a long period of
time using their personal saved data.
The personal data is recalled and includes: gender,
age and weight.
Guest user = U 0.
With the USER button, the desired or preset user can
be selected. In the user field (top left) U1 will blink;
if you press this again > U2 will appear; continue to
press until reaching U 0.
If you do not wish to change your preset personal
data, turn the UP/DOWN control knob. This will
take you directly to the program selection in the
upper part of the display.
If, after selecting a user (e.g. U1) you press the con-
trol knob once (ENTER), you will be able to enter or
change your personal data > gender, age and
weight. U1 is located at the right of the large dis-
play screen. In the user display (top left) the symbol
SEX (gender) will blink and a male or female symbol
can be selected. Adjusting these settings once again
takes place by turning the control knob UP/DOWN,
until the desired value or symbol is displayed and
confirmed by pressing the ENTER button > press the
control knob once. Example: male (symbol + SEX);
25 (AGE); 65 (WEIGHT).
By pressing the ENTER button once again, this will
allow you to set your training program.
If the machine is disconnected from the mains or
reconnected for e.g. due to a change in location,
the input user data (U1 to U4) will be retained when
restarting.
U 0 can be selected as a guest user. For training, it
is not possible to input personal data such as gen-
der, age and weight and this data is therefore not
saved. Only the training functions MANUAL and
PROGRAM may be accessed by the guest user.
IMPORTANT! In the user setting (U1 to U4), only
personal data is saved, not training data such as
TIME, DISTANCE and CALORIES.