Specifications - Nikon PROSTAFF 3 Manuel D'utilisation

Specifications

En
Measurement System
Fr Measured range
Es
Distance indication step
Pt
Target System
Measuring System
Optical system
Type
Magnification (x)
Effective diameter of objective lens (mm)
Angular field of view (real) (˚)
Eye relief (mm)
Exit pupil (mm)
Dioptre adjustment
Others
Operating temperature
Power source
Dimensions (L x H x W) (mm)
Weight (g)
Structure
Safety
EMC
Environment
14
Distance: 10-500 meters/11-550 yards
0.5 meter/yards (< 100m/yds)
1.0 meter/yards ( ≧ 100m/yds)
Distant Target Priority System
Single mode / Continuous mode
Roof-prism monocular
6
ø21
6.0
18.2
ø3.5
±4m
-1
-10° — +50°
CR2 lithium battery x 1 (DC 3V)
130x69x37
Approx. 180 (without battery)
Body: Waterproof
(maximum depth of 1 meter for up to 10 minutes)*
（Battery chamber: Water resistant**）
Class 1M Laser product (EN/IEN60825-1:2007)
FCC Part15 SubPartB class B, EU:EMC directive, AS/
NZS, VCCI class B
RoHS, WEEE
Laser
Class EN/IEC Class 1M
Wavelength 870 nm
Pulse duration 14 ns
Output 15W
Beam divergence Vertical： 25° — 36°, Horizontal： 5° — 8°
Operating humidity 80% RH (without dew condensation)
* Waterproof models
The PROSTAFF 3 is waterproof, and will suffer no damage to the optical system if submerged or dropped in water to a
maximum depth of 1 meter for up to 10 minutes.
The PROSTAFF 3 offers the following advantages:
• Can be used in conditions of high humidity, dust and rain without risk of damage.
• Nitrogen-filled design makes it resistant to condensation and mold.
Observe the following when using the PROSTAFF 3:
• The unit should not be operated nor held in running water.
• Any moisture should be wiped off before adjusting movable parts (focusing knob, eyepiece, etc.) of the PROSTAFF 3 to
prevent damage and for safety reasons.
To keep your PROSTAFF 3 in excellent condition, Nikon Vision recommends regular servicing by an authorized dealer.
** The battery chamber is water resistant, not waterproof. Water may enter the device if the PROSTAFF 3 is submerged in
water. If water enters the battery chamber, wipe out any moisture and allow time for the chamber to dry.
En
Fr
Es
Pt
15