Orved Evox 25 Mode D'emploi Et D'entretien page 2

The vacuum packing machine has been studied and designed to vacuum bags and rigid con-
tainers, with a complete standard cycle (vacuum and seal) being performed every 60 seconds.
It is prohibited to use the machine in a manner or for a purpose other than those indicated by
Orved S.p.A. in this manual.
Proper use of the machine also includes compliance and awareness of the instructions and
warnings contained in this instruction manual, as well as the timely implementation of all in-
spections, servicing and cleaning of the machine.
STRICTLy COMPLy WITh ThE FOLLOWING SAFETy GUIDELINES:
• Before use, make sure the machine is intact and bears no signs of damage.
• If the machine is not used for a long period of time, it must be switched off removing the plug
from the socket.
• Prevent unauthorized persons from accessing the work area.
• Use suitable work clothes and protection gloves.
• Never use the machine in potentially explosive environments, or in the presence of flammable
vapors and gas.
• Make sure there is sufficient ventilation in the workplace.
• Immediately remove all obstacles and interference that can compromise safety.
DANGER!
• The specific instructions related to the safe operation of this appliance is col-
lated together in the front section of the user instructions.
• The machines are designed and manufactured according to the latest techno
logy available and are compliant with applicable safety Standards. Nevertheless, they may
be a source of danger if the safety requirements contained in this manual are not complied
with or in the event of improper use.
DANGER!
• before every machine start-up, check that all the protection and safety devices
are present, efficient and functional.
ELECTRICAL RISKS
ELECTRICAL hAZARD
• The electrical safety of the machine is only guaranteed when it is connected
correctly to an efficient earthing system in accordance with the law.
• Only qualified personnel can operate on the power supply system and access live parts.
• Perform regular inspections of the electrical system of the machine (these are only to be
performed by qualified personnel).
2
Rev. 02 - 05/2016 - Cod. 1500015 - Instruction manual for vacuum chamber packaging machines EVOX 25 / EVOX 25 H