Before Using Evox; Vacuum Chamber And Lid Preliminary Cleaning; Machine Description - Orved Evox 25 Mode D'emploi Et D'entretien

BEFORE USING EVOX 25 / EVOX 25 H
5. BEFORE USING EVOX 25 / EVOX 25 H
We supply the following notions regarding the best use of EVOX 25 / EVOX 25 H.
5.1 VACUUM CHAMBER AND LID PRELIMINARY CLEANING
• Before using the machine, the vacuum chamber and lid must be cleaned using a damp cloth and drinking water.
• It is recommended not to use aggressive detergents, stainless steel scrubbers, scrapers or abrasive, acid or aggressive
substances, which could damage the stainless steel surface inside the vacuum chamber irreparably.
• After cleaning, rinse thoroughly with drinking water.

5.2 MAChINE DESCRIPTION

The machine is made up from an machine body
There is a sealing bar inside the vacuum chamber
The shelves reduce the quantity of air to be sucked, with consequent reduction of cycle duration.
8
1 Machine body
2 Control panel
3 Vacuum chamber lid in tempered glass
4 Vacuum chamber
5 Sealing bar
6 Movement handle
7 Vacuum Gauge
Polyethylene filler for reduction of the air volume to be sucked
8
18
Rev. 02 - 05/2016 - Cod. 1500015 - Instruction manual for vacuum chamber packaging machines EVOX 25 / EVOX 25 H
1 that includes the vacuum chamber
5 , whose function is to seal the bags hermetically.
5
8
7
4 and relative lid
4
3 for closure.
3
1 2 6