DGEA−...
·
Make sure that tubes and connecting
accessories have sufficient space for
movement.
For DGEA with two heads:
·
Mount the DGEA preferably on the bottom
of the heads.
·
Make sure that the cantilever arm runs
exactly parallel to the bearing surface.
Deviations from the parallel reduce the
service life of the bearing guide.
If necessary, compensate for tolerances
between the two heads with metal foils or
sheets.
·
Observe that stroke length H of the DGEA
depends on the distance h between the
two heads.
Festo DGEA−... 0904b English
Ó Ó Ó Ó Ó
Fig. 7
Ó Ó Ó Ó Ó Ó Ó Ó Ó
H
Ó Ó Ó Ó
Ó Ó Ó Ó
h
Fig. 8
35