Intended Use - VOLTCRAFT TC-150 Manuel D'utilisation

INTENDED USE

The temperature calibrator TC-150 calibrates contact thermometers with external submersion or
injection temperature sensors. The calibration body is an electrically controlled heating element with
6 integrated bores (5 in the front, 1 at the top of the housing). The bores have different diameters for
different sensor diameters.
The temperature setting in °Celsius is performed user-compatibly using foil buttons. It can be inspected
via target and actual temperature displays. An integrated fan permits fast temperature changes at the
calibration body. The setting range is from +33 to +300 °C.
The product is set up according to protection class 1. The voltage source must be a proper mains
socket (230 V/AC, 50 Hz) of the public mains with a ground contact. The mains socket must be close to
the device and easily accessible or must have an emergency stop device.
Operation under unfavourable ambient conditions is not permitted. Unfavourable ambient conditions
are:
- Dampness or too high humidity
- Dust and fl ammable gases, vapours or solvents.
- Thunderstorms or similar conditions such as strong electrostatic fi elds, etc.
Any use other than that described above damages the product. Moreover, this is linked to dangers
such as short circuit, fi re, electric shock, etc. No part of the product must be modifi ed or converted!
Always observe the safety information!
14