Safety Information - VOLTCRAFT TC-150 Manuel D'utilisation

SAFETY INFORMATION

Please read the operating instructions completely before taking the device into
operation. They contain important information for correct operation.
The guarantee/warranty will expire if damage is incurred resulting from non-com-
pliance with the operating instructions! We do not assume any liability for conse-
quential damage!
We do not assume any liability for damage to property or personal injury caused by improper use or the
failure to observe the safety instructions! In such cases the warranty/guarantee will expire.
This device left the manufacturer's factory in safe and perfect condition.
To maintain this condition and to ensure safe operation, the user must observe the safety information
and warning notes in these operating instructions. Observe the following symbols:
An exclamation mark in a triangle shows important notes in these operating instructions
that must be strictly observed.
This device is CE-compliant and meets the applicable European directives.
The "arrow" symbol indicates that special advice and notes on operation are provided.
Connection point for the internal protective ground. This screw/contract must not be
loosened.
For use in dry indoor areas only
Caution, hot surface!
There is a danger of burns when touching. Never touch the heating and cooling areas in
operation. Let the device cool down suffi ciently before touching it.
For safety and approval reasons (CE), unauthorised conversion and/or modifi cation of the device are
not permitted.
Consult an expert when in doubt as to the operation, safety or the connection of the device.
The device must not be opened. Live components may be exposed if covers are opened or parts are
removed (unless this can be done without tools). Capacitors inside the device may still carry voltage
even though the device has been disconnected from all power sources.
Comply with the safety and operating instructions of any other devices that are connected to the device
and in the individual chapters of these instructions.
Never touch the device with wet or damp hands. There is the risk of a potentially fatal electric shock.
The device must not be operated unsupervised.
Only insert the sensor shaft into the intended heating body openings (4/5). Never push the sensor into
housing openings that serve ventilation and venting. There is a danger of electric shock and injury.
15