Intended Use; Explanation Of Symbols - VOLTCRAFT DL-201 THM Notice D'emploi

3. INTENDED uSE

The device is intended for measuring the degree of moisture of wood and wood materials.
The degree of moisture can be controlled across a certain period of time. The measurement
takes place via two measuring mandrels that are held against the material to be measured or
plugged into it. Additionally, the ambient temperature and ambient humidity can be measured
as well.
Any use other than described above is forbidden and may harm the device and line, resulting
in risks like short circuit, fire, electric shock, etc. The entire product must not be modified or
converted.
We refuse any liability for damage and injury caused by misuse, function impairment or
improper treatment of the product. In such cases the guarantee/warranty will expire!
Before taking the product into operation, read the complete operating instructions carefully.
They contain important information on proper operation of the device.
The measuring device must not be operated when it is open, i.e. with an open battery compart-
ment or when the battery compartment cover is missing. Measurement under unfavourable
ambient conditions is not permitted.
Unfavourable ambient conditions are:
• Dust and flammable gases, vapours or solvents
• Thunderstorms or similar conditions such as strong electrostatic fields, etc.
Read the operating instructions carefully and keep them for later reference.
Always observe the safety information!

4. ExPLaNaTIoN oF SyMBoLS

An exclamation mark in a triangle shows important notes in these operating instruc-
tions that must be strictly observed.
The "arrow" symbol indicates that special advice and notes on operation are provided.
This device is CE-compliant and meets the applicable European directives.
28