Dreve Drufosmart scan Mode D'emploi page 17

Drufosmart scan
7. Display
g
h
i
j
No. Description
a indication of heating time
b indication of product name and material strength
c indication of cooling time
d change of menu items (backwards)
e change of time indications (upwards)
f confirmation key / start button heating
g indication of pressure inside piston
h control indication for individual time modifications
32
8. Operation
Turn the unit on by means of the main
switch (43) at the back of the unit. By
this the scanner (1) and the display
(2) at the front of the unit will be acti-
a
vated. An acoustic signal shows that
b
the unit is ready for operation; the dis-
play will show the name of the machine
c
Drufosmart scan.
8.1 Scan modus
Every outer package of Dreve thermo-
d
forming blanks is labelled with a bar-
code label.
e
f
This barcode contains the encrypted
product name, material strength as
well as the individual heating and cool-
ing times.
In order to scan the material data with
the Drufosmart scan the barcode is to
be placed as centrally and evenly as
possible onto the scan field (1).
There will be an acoustic signal for the
confirmation of the data capture and
the display will show all necessary data.
Info
The light emanating from the
scanner is harmless. Even in case
of direct eye contact it has no neg-
ative impact!
After 15 min. without use the
scanner turns off automatically. By
pressing the OK key it can be re-
activated again. During an active
thermoforming process the scan-
ner is deactivated. After termina-
tion of the process it will be re-
activated automatically.
33