Maintenance And Service; Maintenance And Cleaning; After-Sales Service And Application Service - Bosch GTS 10 J Professional HEAVY DUTY Notice Originale

Fig- Tool element Storage compartment
ure
O5 Additional parallel Slide into the holding clips (31)
guide (43) (short side facing up, long side
facing the rear)
Transporting the power tool
Before transporting the power tool, the following steps must
be carried out:
– Bring the power tool into the transport position.
– Remove all accessories that cannot be securely fitted to
the power tool.
If possible, transport unused saw blades in an enclosed
container.
– Slide the saw table expansion (14) in fully and push the
clamping handle (16) down to secure it in place.
– Wrap the power cable around the cable holder (30).
– Use the carrying handles (13) to lift or transport the tool.
Only use the transport devices to transport the power
u
tool and never the protective devices.

Maintenance and Service

Maintenance and Cleaning

Pull the plug out of the socket before carrying out any
u
work on the power tool.
To ensure safe and efficient operation, always keep
u
the power tool and the ventilation slots clean.
In order to avoid safety hazards, if the power supply cord
needs to be replaced, this must be done by Bosch or by an
after-sales service centre that is authorised to repair Bosch
power tools.
Cleaning
Always remove dust and chips after working by blowing out
with compressed air or using a brush.
Lubricating the power tool
Lubricant:
SAE 10/SAE 20 engine oil
– Oil the power tool as necessary at the points
indicated (see figure P).
An authorised Bosch after-sales service point will handle this
work quickly and reliably.
Dispose of lubricants and cleaning products in an en-
u
vironmentally friendly manner, taking legal regula-
tions into account.
Noise reduction measures
Measures implemented by the manufacturer:
– Soft start
– Provided with a saw blade specially developed for noise
reduction
Measures implemented by the operator:
– Low-vibration mounting on a stable work surface
– Use of saw blades with noise-reducing functions
– Regular cleaning of the saw blade and power tool
Bosch Power Tools
Accessories
Dust bag
Dust extraction adapter
Y adapter TSVH 3
Angle guide
Push stick
GTA 600 saw stand
Saw blades for wood and fibreboard, panels and strips
254 x 25.4 mm saw blade, 40 teeth
254 x 25.4 mm saw blade, 60 teeth

After-Sales Service and Application Service

Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Malaysia
Robert Bosch Sdn. Bhd.(220975-V) PT/SMY
No. 8A, Jalan 13/6
46200 Petaling Jaya
Selangor
Tel.: (03) 79663194
Toll-Free: 1800 880188
Fax: (03) 79583838
E-Mail: kiathoe.chong@my.bosch.com
www.bosch-pt.com.my
You can find further service addresses at:
www.bosch-pt.com/serviceaddresses
Disposal
The power tool, accessories and packaging should be re-
cycled in an environmentally friendly manner.
Do not dispose of power tools along with
household waste.
English | 27
Article number
2 610 015 511
2 610 015 509
2 610 015 513
2 610 015 507
2 610 015 022
0 601 B22 001
2 608 640 901
2 608 640 902
1 609 92A 6YX | (01.09.2021)