Adjusting The Speaker Volume; Technical Data - SOMFY V 100+ Notice D'installation

3.4 Adjusting the speaker volume
3.4.1 Adjust the speaker volume
To adjust the door station speaker volume, use a screwdriver to
turn the button on the back of the door station:
• clockwise to increase the volume.
• anti-clockwise to reduce the volume.
3.4.2 Adjusting the call button audio signal
There are two sound levels available: low / high.
Press the call button for 5 seconds until you hear a beep,
indicating whether the current sound level is high or low.
Press again for 5 seconds to change its status.
Camera
Night vision
Outputs
Electric latch output activation
time
Dry contact activation time
Name plate holder / call button
Mounting
Materials
Size (H x l x th)
Settings
Operating temperature
Degree of protection
Copyright © 2022 Somfy Activités SA. All rights reserved.
4. TECHNICAL DATA
Angle of vision: H = 102°, V = 65°
Infrared LEDs
Latch: 12 V, 800 mA
Dry contact
2, 5 or 10 seconds
1 second
Back-lit
Surface mounting with rain shield
Aluminium and plastic
77 x 151 x 45 mm
Speaker volume
-20°C to +40°C
IPX4
EN
Speaker
volume
adjustment
button
5