Disconnecting The Mains Supply / Supply Cut - Haverland RCWave + Manuel D'installation Et D'utilisation

3. OPERATION
NOTE 7
Remember that to link your mobile device with your radiator you must:
Press
3.5 DISCONNECTING THE MAINS SUPPLY / SUPPLY CUT OFF
If the radiator is kept disconnected from the mains (for
instance, the radiator switch is disconnected) or if there
is a mains supply cut off for more than 2 hours, YOU
MUST UPDATE THE CLOCK AND THE DAY OF THE
WEEK.
The rest of the programmed parameters (temperatures and programming) are kept in memory.
There are two ways to update the clock and the day of the week:
Via "Haverland BT" App (recommended):
If you have downloaded the "Haverland BT" App, link
your mobile device to your radiator (follow the
previous point 3.4) and click on the App
The clock and day will be updated via the internet.
On the radiator:
Follow point 3.3 of the manual "SET UP DAY AND TIME".
and then press the
button.
.
RCW +
EN
EN
37