Part Names And Functions Of The Controller - Panasonic EP-MAF1 Mode D'emploi

Part names and functions of the controller

Controller
OFF/ON button
⁃
Starting massage operations
• The power of the controller is turned
on.
• The power is automatically turned
off when the massage operation is
completed.
⁃
Suspending ongoing massage
operations
• The legrest goes down automatically,
the backrest rises, and the massage
rollers are stored in the original
positions.
BACK button
⁃
Returns to the previous screen.
Vertical selection/adjustment
button (▲/▼)
Horizontal selection/
adjustment button (◀/▶)
OK button
⁃
Executes the operation or
function selected on the display.
Press the reclining angle adjustment button
Press to adjust.
⁃
Press turn the power of the controller on to use the
massage lounger.
⁃
Backrest and legrest angles can be adjusted.
⁃
Armrests will move in conjunction with the reclining of the
backrest.
⁃
When holding down the adjustment buttons, chair adjustment
will continue until you hear the limit sound (beep-beep-beep).
About language selection
The language selection screen will be
displayed only the first time when the
control unit is activated. (See EN29
for setting and changing)
EN18
⁃
A confirmation sound will sound when
the operation is accepted.
Display section
Emergency stop button
⁃
In case of emergency or feeling abnormal
sensations while in operations.
• Press this button to stop the massage
immediately.
• The legrest, backrest, and massage
rollers will not return to their storing
positions.
• Get off the unit body, being careful not
to tip over.
• In order to use, press
returning the backrest and the massage
rollers to their storing positions, and
then use again.
• When you press the button, you will
hear a confirmation beep sound.
Intensity button
⁃
Displays the screen for adjusting the
strength of back massage rollers and the
strength for upper arms/arms, thighs/ legs,
and soles.
If you press Emergency stop button, turn off
the power switch on the back of the main unit,
or unplug the power plug, massage rollers
may move automatically
the next time you use it.
During that time, the
display on the right
appears, but this is not
a malfunction.
After the massage
rollers has moved for
a while, it can be used
normally.
twice