Dashboard Controls / Gauges - Titan ProMark 98:2 Série Mode D'emploi

description of unit
3.4

DAShBoArD coNTrolS / gAugeS

fIgure 4
1
2
3
4
5
6
7
8
9
ITem DeScrIpTIoN
1
BPO pressure gauge
2
DataLogger™
3
Engine throttle
4
12V power jack
5
Key ignition
6
Spray material pressure gauge
7
Caster trigger
8
Pressure control knob
9
Spray button
14
fuNcTIoN
Measures the spraying pressure of the BPO.
Equipped on the ProMark 250 only. See section 3.5 for details.
Determines the running speed of the engine.
Can be used to plug in a mobile phone or other compatible device.
The key ignition turns the unit ON and starts the engine.
Measures the spraying pressure of the spray material.
Controls the front caster.
•
To lock the front caster in the straight line position, squeeze then release the caster trigger
and move the sprayer forward.
•
To allow free motion of the front caster, squeeze and hold the caster trigger.
Determines the spraying pressure of the system. Turn counterclockwise to decrease, clockwise
to increase.
This button will activate the spray guns as well as the dispenser bead guns when pressed.
ProMark