Calc'n'clean - Siemens TE506 Séries Mode D'emploi

de en
the start button (10).
The cleaning programme will start.
To clean the appliance before being prompted,
e
j
press the off /
3 seconds. Then press the
ton (13) briefly twice. Turn the upper rotary
Start cleaning
knob (15) until
in the display. To start the cleaning proce­
dure, press the start button (10).
The display will guide you through the
programme.
Empty drip tray
Insert drip tray
● Empty drip tray (8) and replace them.
Cleaning in progress
The appliance rinses twice.
Open drawer
● Open the drawer (4).
Fill cleaner
● Drop a Siemens cleaning tablet in the
drawer (4) and close.
Cleaning in progress
The cleaning pro gramme will now run for
about 8 minutes.
Empty drip tray
Insert drip tray
● Empty drip tray (8) and replace them.
The appliance has finished cleaning is
ready for use again.

Calc'n'Clean

Duration: approx. 35 minutes.
Calc'n'Clean combines the separate func­
tions of descaling and cleaning. If both
programmes are due to be run soon, the
espresso machine automatically suggests
this service programme.
Important: If there is a filter in the water
tank (17), it needs to be removed before the
service programme is run.
34
button (13) for at least
e
j
off / but­
appears
Calc'n'Clean required!
If the message
appears on the display, press the
button (13) for 3 seconds and then press
the start button (10). The service pro­
gramme will start.
To run Calc'n'Clean before being prompted,
e
j
press the off /
3 seconds. Then press the
(13) briefly twice. Turn the upper rotary
Start Calc'n'Clean
knob (15) until
appears in the display. To start Calc'n'Clean,
press the start button (10).
The display will guide you through the
programme.
Empty drip tray
Insert drip tray
● Empty drip tray (8) and replace them.
Calc'n'Clean in progress
The appliance rinses twice.
Open drawer
● Open the drawer (4).
Fill cleaner
● Drop a Siemens cleaning tablet in the
drawer (4) and close.
N.B.: If the water filter is activated, the dis­
play will prompt you to remove the filter and
then press the start button (10) again. Re­
move the filter now if you have not already
done so. Press the start button (10).
Fill descaler
Press start
● Pour lukewarm water into the empty wa­
ter tank (17) up to the 0,5l mark and dis­
solve 2 Siemens descaling tablets in it.
● Press the start button (10).
Place container
Press start
● Place a receptacle with a capacity of at
least 1 litre under the outlet (6a).
● Press the start button (10).
e
off /
button (13) for at least
e
j
off /
button
j