Controls; Power On/Off Switch O / I; Start Button; Button - Siemens TE506 Séries Mode D'emploi

Controls

Power on/off switch O / I

The power switch O / I (9) is used to switch
the appliance on or to switch it off fully
(power supply off).
Important: Before switching off, run the
cleaning programme or use the
button (13) to switch off.
d

button

d
Press the button (11) to prepare
two cups of the selected drink at the
same time. The button can be activated
for drinks without milk and without the
aromaDouble Shot function.
e
j
off / button
e
j
When the off /
briefly, the appliance rinses and switches
off. Pressing and holding down the
button (13) displays the user settings or
starts the descaling and cleaning function.
h g
/ button
h g
Press the / button (12) to generate
steam for preparing milk froth or warm milk.
This button is also used to dispense hot
water.

start button

Press the start button (10) to begin drink
preparation or to start a service programme.
Press the start button (10) again during
drink preparation to cut the dispensing
process short.
e
off /
button (13) is pressed
e

"Coffee strength" rotary knob

h
to
j
g

"Drink selection" rotary knob

j
off /
a
to
c
m
to
n
e
f
N.B.: If a drink is selected that cannot be
prepared,
in the display. Change the coffee strength or
the selected drink.
This rotary knob (14) is used
to set the coffee strength.
Very mild
Mild
Normal
Strong
DoubleShot strong+
DoubleShot strong++
With these coffee strengths
the coffee is brewed in 2
stages. See "aromaDouble
Shot" on page 24.
This rotary knob (15) is used
to select the required drink
and the per­cup quantity. It
is also used to change user
settings.
Coffee­based drinks without
milk:
Small Espresso
Espresso
Small Café Crème
Café Crème
Large Café Crème
Coffee­based drinks with
milk:
Small Cappuccino
Large Cappuccino
Small Macchiato
Macchiato
Large Macchiato
Rinse machine
Rinse milk system
Invalid combination
de en
appears
23