Rotary Selector; Display Messages; Aromadouble Shot; Before Using For The First Time - Siemens TE506 Séries Mode D'emploi

de en

Rotary selector

To dispense milk froth – for example for a
latte macchiato or cappuccino – turn the
symbol to the front.
To dispense warm milk, turn the
to the front.
To dispense hot water, set the rotary selec­
tor to the horizontal position.

Display messages

The display (16) shows not only the current
operating status, but also various messages
that give you status information or let you
know when you need to take action. As
soon as you have taken the necessary ac­
tion, the message disappears and the menu
for drink selection is displayed again.
24

aromaDouble Shot

j
The longer the coffee is brewed, the more
bitter substances and undesired aromas
i
symbol are released. This has a negative effect on
the taste and makes the coffee less easily
digestible. So for extra strong coffee the
TE506/TE509 has a special aromaDou­
ble Shot function. When half the quantity
has been prepared, coffee is ground and
brewed again so that only the pleasant,
aromatic scents are released.
The aromaDouble Shot function is activated
with the following settings:
Before using for the first
time
General
Fill the water tank with fresh, cold, uncar­
bonated water only, and preferably use only
beans for fully automatic coffee and espres­
so machines. Do not use coffee beans that
have been glazed, caramelised or treated
with other additives containing sugar, since
they will block the brewing unit.
The water hardness setting can be adjusted
on this appliance. The factory default setting
for the water hardness is 4. Check the
water hardness with the enclosed test strip.
If the check reveals a value other than 4,
change the setting on the appliance accord­
ingly after switching on (see "Menu settings"
Water hardness
on page 27).