Remote Start; Home Connect® Settings; Setting Remote Control - Thermador ME301YP Mode D'emploi

en-us Home Connect®
Within 2 minutes press the WPS button on the router.
5.
Wait until "NETWORK CONNECTED" is shown in the
display.
a The connection may fail. In this case "CONNECTION
FAILED" is shown on the display.
Return to the Home Connect® setup menu and try to
6.
connect manually.
a The appliance is ready to connect to the app.
Follow the instructions of the app on your mobile device
7.
for automatic network registration.
a The process for registering is completed once "PAIR-
ING SUCCESSFUL" is shown in the display.

Remote start

If you want to start an oven operation using your mobile
device, you must activate Remote Start.
WARNING
Risk of injury!
REMOTE OPERATION This appliance is configurable to
allow remote operation at any time.
Do not store any flammable materials or temperature
▶
sensitive items inside, on top or near surface units of
the appliance.
Note
¡ For some models a permanent Remote start can be ac-
tivated via the Home Connect® app. This function al-
lows a remote start of the available operating modes
without automatically deactivating Remote start.
¡ Remote start can only be activated if the Home Con-
nect® set-up has been successfully completed.
¡ Some operating modes can only be started on the oven
itself.
Setting remote start
Select REMOTE START.
▶
Remote start is automatically deactivated 24 hours after
remote start has been activated. When you start the
oven operation on the appliance, remote start is auto-
matically activated. You can therefore make changes
from your mobile device or start a new operation.
a
appears in the display.
Home Connect® settings
Adapt Home Connect® to your needs.
You can find the Home Connect® settings in the basic set-
tings for your appliance. Which settings the display shows
will depend on whether Home Connect® has been set up
and whether the appliance is connected to your home net-
work.
Activating or deactivating Wi-Fi
You can use the Home Connect functions, if Wi-Fi is acti-
vated.
Press SETTINGS to cycle through available options un-
1.
til "HOME CONNECT SETTINGS" is displayed.
Press ENTER.
2.
Press SETTINGS to cycle through available options un-
3.
til "WI-FI ON" or "WI-FI OFF" is displayed.
Press ENTER.
4.
22
Press 0 for turning Wi-Fi off, or 1 for turning Wi-Fi on.
5.
a "DEACTIVATING WI-FI" or "ACTIVATING WI-FI" is dis-
played.
Disconnecting from the network
You can disconnect your oven from the network at any
time.
Note: If your oven is disconnected from the network, it is
not possible to operate the oven using Home Connect®.
Press SETTINGS to cycle through available options un-
1.
til "HOME CONNECT SETTINGS" is displayed.
Press ENTER.
2.
Press SETTINGS to cycle through the available options
3.
until "NETWORK CONNECTED" is displayed.
Press ENTER
4.
a "PRESS 0 TO DISCONNECT" is displayed.
Press 0.
5.
a "DELETING NETWORK" is displayed.
Connecting to the network
Press SETTINGS to cycle through available options un-
1.
til "HOME CONNECT SETTINGS" is displayed.
Press ENTER.
2.
a "PRESS ENTER FOR HC" is displayed.
Press ENTER to start the Home Connect® assistant.
3.
Follow the instructions in the sections
4.
→ "Manually registering your appliance in the home net-
work", Page 21 or
→ "Connecting your appliance to your home network
with WPS", Page 21.
Connecting to app
If the Home Connect® app is installed on your mobile de-
vice, you can connect it to your oven.
Requirement: The appliance is connected to the network.
Press SETTINGS to cycle through available options un-
1.
til "HOME CONNECT SETTINGS" is displayed.
Press ENTER.
2.
a "PRESS ENTER FOR HC" is displayed.
Press SETTINGS to cycle through available options un-
3.
til "CONNECT TO HC APP" is displayed.
Press ENTER.
4.
a "CONFIRM ON HC APP" is displayed.
Confirm the connection on your Home Connect® app.
5.

Setting remote control

You can use the Home Connect app to easily access the
functions of your oven.
Note
¡ Operating the appliance directly from the oven always
has priority. During this time, it is not possible to operate
the oven using the Home Connect® app.
¡ The remote control is already activated when you con-
nect your oven
¡ If the remote control has been deactivated, only the
oven's operating statuses will be displayed in the
Home Connect® app.
¡ The remote control is automatically activated when the
remote start is activated.