Remote Start; Home Connect Settings - Thermador Professional Série Guide D'utilisation Et D'entretien

Masquer les pouces Voir aussi pour Professional Série:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Use the "HomeConnect" SSID and the
7.
"HomeConnect" key to register the mobile device on
the oven network. Follow the instructions in the app.
Wait until "Network connection successful" is shown
8.
on the display.
The connection may fail. The display will alert you to
try again or connect automatically.
The appliance is ready to connect to the app.
9.
Follow the instructions of the app on your mobile
10.
device.
The process for registering is completed once "Pairing
successful" is shown on the display.

Remote Start

If you want to start an oven operation using your mobile
device, you must activate Remote Start.
Note: Some operating modes can only be started on the
oven itself.
Turn the function selector to REMOTE START.
1.
appears in the display.
F
2.
Remote Start is automatically deactivated in the
following situations:
The oven door is opened 15 minutes after Remote
Start is activated.
The oven door is opened 15 minutes after the oven
operation has ended.
24 hours after Remote Start has been activated.
When you start the oven operation on the appliance,
Remote Start is automatically activated. You can
therefore make changes from your mobile device or start
a new operation.

Home Connect Settings

You can adjust Home Connect to suit your requirements
at any time.
Note: In the Home Connect settings, press the INFO
touch button to display network and device information.
Wi-Fi
You can use the Home Connect functions, if Wi-Fi is
activated.
Touch the SETTINGS touch button.
1.
Swipe to the left or right to select "Home Connect".
2.
Touch "Open settings".
3.
Swipe to the left or right to select "Wi-Fi".
4.
Touch the bottom line to select "On" or "Off".
5.
Touch the
field to return to the Home Connect
;
6.
settings menu.
Disconnecting from the Network
You can disconnect your oven from the network at any
time.
Note: If your oven is disconnected from the network, it is
not possible to operate the oven using Home Connect.
Touch the SETTINGS touch button.
1.
Swipe to the left or right to select "Home Connect".
2.
Touch "Open settings".
3.
Swipe to the left or right to select "Disconnect".
4.
27

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Professional pods302w

Table des Matières