Remote Start; Home Connect Settings - Thermador Masterpiece Série Mode D'emploi

Remote Start

If you want to start an oven operation using your mobile
device, you must activate Remote Start.
Notes
The "Remote start" text field is only visible if the Home
▯
Connect assistant has been successfully completed.
Some operating modes can only be started on the
▯
oven itself.
Touch the MENU touch button.
1.
Touch "Remote start".
2.
appears in the display.
F
Remote Start is automatically deactivated in the
following situations:
The oven door is opened 15 minutes after Remote
▯
Start is activated.
The oven door is opened 15 minutes after the oven
▯
operation has ended.
24 hours after Remote Start has been activated.
▯
When you start the oven operation on the appliance,
Remote Start is automatically activated. You can
therefore make changes from your mobile device or
start a new operation.

Home Connect Settings

You can adjust Home Connect to suit your requirements
at any time.
Note: In the Home Connect settings, press the INFO
touch button to display network and device information.
Wi-Fi
You can use the Home Connect functions, if Wi-Fi is
activated.
Touch the MENU touch button.
1.
Swipe to the left or right to select "Settings".
2.
Swipe to the left or right to select "Home Connect".
3.
Touch "Open settings".
4.
Swipe to the left or right to select "Wi-Fi".
5.
Touch the bottom line to select "On" or "Off".
6.
Touch the field to return to the Home Connect
;
7.
settings menu.
32
Disconnecting from the Network
You can disconnect your oven from the network at any
time.
Note: If your oven is disconnected from the network, it is
not possible to operate the oven using Home Connect.
Touch the MENU touch button.
1.
Swipe to the left or right to select "Settings".
2.
Swipe to the left or right to select "Home Connect".
3.
Touch "Open settings".
4.
Swipe to the left or right to select "Disconnect".
5.
Touch "Disconnect from network".
6.
Confirm by touching "Disconnect".
7.
All connections are deleted.
Note: You can abort the action by touching "Cancel".
Connecting to the network
Touch the MENU touch button.
1.
Swipe to the left or right to select "Settings".
2.
Swipe to the left or right to select "Home Connect".
3.
Touch "Open settings".
4.
Swipe to the left or right to select "Connect to
5.
network".
Touch "Start assistant".
6.
Follow the instructions in the section entitled "Manual
7.
registration in the home network" or "Automatic
registration in the home network".
Connect to App
If the Home Connect app is installed on your mobile
device, you can connect it to your oven.
Note: The appliance must be connected to the network.
Touch the MENU touch button.
1.
Swipe to the left or right to select "Settings".
2.
Swipe to the left or right to select "Home Connect".
3.
Touch "Open settings".
4.
Swipe to the left or right to select "Connect to app".
5.
Touch the bottom line to select "Start".
6.
C o n n e c t i n g t o t h e n e t w o r k