Remote Start; Home Connect® Settings - Thermador ME301YP Guide D'utilisation Et D'entretien

en-us Home Connect®
Press ENTER.
2.
If no network has been established, the Home Con-
a
nect® assistant will guide you.
Press ENTER to select the Home Connect® assis-
3.
tant.
Press SETTINGS to start the WPS network setup
4.
process.
Within 2 minutes press the WPS button on the router.
5.
Wait until "NETWORK CONNECTED" is shown in the
display.
The connection may fail. In this case "CONNECTION
a
FAILED" is shown on the display.
Return to the Home Connect® setup menu and try to
6.
connect manually.
The appliance is ready to connect to the app.
a
Follow the instructions of the app on your mobile de-
7.
vice for automatic network registration.
The process for registering is completed once "PAIR-
a
ING SUCCESSFUL" is shown in the display.

Remote start

If you want to start an oven operation using your mobile
device, you must activate Remote Start.
WARNING
Risk of injury!
REMOTE OPERATION This appliance is configurable to
allow remote operation at any time.
▶
Do not store any flammable materials or temperature
sensitive items inside, on top or near surface units of
the appliance.
Note
For some models a permanent Remote start can be
¡
activated via the Home Connect® app. This function
allows a remote start of the available operating
modes without automatically deactivating Remote
start.
Remote start can only be activated if the Home Con-
¡
nect® set-up has been successfully completed.
Some operating modes can only be started on the
¡
oven itself.
Setting remote start
Select REMOTE START.
▶
Remote start is automatically deactivated 24 hours af-
ter remote start has been activated. When you start
the oven operation on the appliance, remote start is
automatically activated. You can therefore make
changes from your mobile device or start a new oper-
ation.
appears in the display.
a
Home Connect® settings
Adapt Home Connect® to your needs.
You can find the Home Connect® settings in the basic
settings for your appliance. Which settings the display
shows will depend on whether Home Connect® has
been set up and whether the appliance is connected to
your home network.
22
Activating or deactivating Wi-Fi
You can use the Home Connect functions, if Wi-Fi is ac-
tivated.
Press SETTINGS to cycle through available options
1.
until "HOME CONNECT SETTINGS" is displayed.
Press ENTER.
2.
Press SETTINGS to cycle through available options
3.
until "WI-FI ON" or "WI-FI OFF" is displayed.
Press ENTER.
4.
Press 0 for turning Wi-Fi off, or 1 for turning Wi-Fi on.
5.
"DEACTIVATING WI-FI" or "ACTIVATING WI-FI" is dis-
a
played.
Disconnecting from the network
You can disconnect your oven from the network at any
time.
Note: If your oven is disconnected from the network, it is
not possible to operate the oven using Home Connect®.
Press SETTINGS to cycle through available options
1.
until "HOME CONNECT SETTINGS" is displayed.
Press ENTER.
2.
Press SETTINGS to cycle through the available op-
3.
tions until "NETWORK CONNECTED" is displayed.
Press ENTER
4.
"PRESS 0 TO DISCONNECT" is displayed.
a
Press 0.
5.
"DELETING NETWORK" is displayed.
a
Connecting to the network
Press SETTINGS to cycle through available options
1.
until "HOME CONNECT SETTINGS" is displayed.
Press ENTER.
2.
"PRESS ENTER FOR HC" is displayed.
a
Press ENTER to start the Home Connect® assistant.
3.
Follow the instructions in the sections
4.
→ "Manually registering your appliance in the home
network", Page 21 or
→ "Connecting your appliance to your home network
with WPS", Page 21.
Connecting to app
If the Home Connect® app is installed on your mobile
device, you can connect it to your oven.
Requirement: The appliance is connected to the net-
work.
Press SETTINGS to cycle through available options
1.
until "HOME CONNECT SETTINGS" is displayed.
Press ENTER.
2.
"PRESS ENTER FOR HC" is displayed.
a
Press SETTINGS to cycle through available options
3.
until "CONNECT TO HC APP" is displayed.
Press ENTER.
4.
"CONFIRM ON HC APP" is displayed.
a
Confirm the connection on your Home Connect®
5.
app.