Maintenance - Thermador ME301YP Mode D'emploi

en-us Cleaning and maintenance
Preparing self clean
WARNING
Risk of injury!
¡ During the elimination of soil during self-cleaning, small
amounts of carbon monoxide can be created and the
fiberglass insulation could give off very small amounts
of formaldehyde during the first several cleaning cycles.
To minimize exposure to these substances, provide
▶
good ventilation with an open window, or use a venti-
lation fan or hood.
¡ During the self clean cycle, parts of the appliance may
become potentially harmful to persons who lack adult
knowledge of appliances and adult reactions to poten-
tially harmful conditions.
Children should not be left alone or unattended in an
▶
area where appliances are in use.
¡ The oven heats up to very high temperature during self
cleaning. Opening the door can result in injury.
When self-cleaning, confirm that the door locks and
▶
will not open.
If the door does not lock, do not run self clean. Con-
▶
tact Customer support.
CAUTION
Risk of harm to health!
¡ Remove broiler pans, pots, and other utensils and ex-
cess spillage before self-cleaning.
¡ Do not leave food or cooking utensils, etc., in the oven
during the pyrolytic self-cleaning mode of operation.
CAUTION
Risk of fire!
The oven vents are important for air circulation. Covering
the oven vents will cause the oven to overheat. Refer to
the appliance overview for the location of the oven vents.
→ "Familiarizing yourself with your appliance", Page 11
Do not obstruct oven vents.
▶
NOTICE!
Do not clean parts or accessories with the self clean func-
tion.
Remove all accessories and racks from the oven.
1.
Wipe out excessive spillage from the oven cavity.
2.
Starting self clean
Requirements
¡ All heating modes or timers are canceled.
¡ You have carried out the steps for preparing the oven
for self clean.
→ "Preparing self clean", Page 28
For double ovens: Select the oven cavity you want to
1.
clean.
Press SELF CLEAN.
2.
Light bulb specifications by oven type
Refer to this chart for information on the light bulb you have to use for your oven model.
Oven type
One light per oven cavity
28
a
a The default self clean time "4:00" blinks on the timer
display.
You can set a self clean time between 2 and 4 hours
3.
with the numeric keypad.
Tip: Use a longer setting for a heavily soiled oven.
Press ENTER.
4.
a The oven door locks.
remains lit until the oven has cooled down after self
clean is finished.
a "SELF CLEAN" lights up on the display.
a The timer starts to count down.
a When self clean is finished, the display shows 0:00. The
oven remains locked until it has cooled down suffi-
ciently. "COOLING DOWN" is displayed.
a When the oven has cooled down the door unlocks and
"SELF CLEAN FINISHED" is displayed.
Press CLEAR/OFF.
5.
Wipe the remaining ash from the oven with a moist
6.
cloth.
Canceling self clean
Press CLEAR/OFF.
1.
a "COOLING DOWN" is displayed.
a The door remains locked.
a When the oven has cooled down the door unlocks and
"SELF CLEAN FINISHED" is displayed.
Press CLEAR/OFF.
2.
Wipe the remaining ash from the oven with a moist
3.
cloth.

Maintenance

Replacing an oven light bulb
When the oven light fails you can exchange the light
bulbs.
Risk of electric shock!
Light socket is live when door is open if main power supply
is not turned off.
Turn off main power supply at the service panel before
▶
changing the light bulbs.
Risk of injury!
Make sure the appliance and lights are cool and power to
the appliance has been turned off before replacing the
light bulb(s). Failure to do so could result in electrical
shock or burns.
The lenses must be in place when using the appliance.
▶
The lenses serve to protect the light bulb from breaking.
▶
The lenses are made of glass. Handle carefully to avoid
▶
breaking. Broken glass can cause an injury.
Bulb description
25 Watt, halogen bulb, G9 base,
120 Volts
lights up on the display.
blinks on the display and then
WARNING
WARNING
Bulb image