Turning The Monitor Off; Using Keys; Shortcut Key; Using The Main Menu - Gima 35134 Manuel De L'utilisateur

patient.
Refer to the corresponding Section for details of how to perform the measurements you require.

3.3 Turning the Monitor Off

To disconnect the monitor from the power, follow this procedure:
1. Confirm that patient monitoring is complete.
2. Disconnect patient cables and sensors from the patient.
3. Make sure to save or clear the monitoring data as required.
4. Press the Power on/off key on the front panel to turn off the monitor.
Although not recommended, you can press and hold the Power on/off key for 10 seconds to forcibly shut down

the monitor when it can not be shut down normally or under some special situations. This may cause loss of
data of the monitor.

3.4 Using Keys

3.4.1 Shortcut Key

Refer to Section 2.2 for details.

3.5 Using the Main Menu

To enter the main menu by Longtime pressing the "Navigation Knob" in the default screen, the System Menu screen
will display in the lower left area on the screen, as shown in Figure 3.1. Most of the monitor's operations and settings
can be perform through the main menu.
Note: some of the above mentioned functions are for optional, so your monitor may not cover all functions, please
refer to the monitor in your hand.

3.5.1 How to Select the Menu Item

Operator's Manual for Patient Monitor
Figure 3.1
19