Screen Display With Ecg Waveforms Only - Gima 35134 Manuel De L'utilisateur

12.3 Screen Display with ECG Waveforms only

Press the DISP key to shift screen to 7 ECG Waveform Screen when setting Disp2 as "7 ECG" in System Setup screen. In
this screen, the operator can view 7 traces of ECG waveforms simultaneously for lead I, II, III, AVR, AVL, AVF and V, as
shown in Figure 2.9.
Operation Instructions:
ECG lead: No action.
Alarm silence: press it to enable or disable the alarm silence function.
Freeze: press it to freeze all 7 ECG waveforms. Double press this key within 2 seconds to lock or
unlock the operation of all other buttons (except power switch) on the front panel.
NIBP: press it to start or stop NIBP measure.
DISP: press it to shift the display to the Main Screen.
Operator's Manual for Patient Monitor
Figure 12.3 7 traces of the ECG waveforms display only
73