Accessories; How To Use; Power On/Off; Measurement - Gima SP-10 Manuel De L'utilisateur

5.3 Accessories

1) A User Manual
2) A USB data line
3) A mouthpiece
4) A power adapter
5) A CD (PC software)
6) A nose clip (optional)
Other type adapter should meet the following conditions: output voltage: DC 5V; output current≥500mA, the
power adapter must meet the requirements of EN60601 related standards and have the CE mark.
Chapter 6
OPERATING GUIDE

6.1 How to use

6.1.1 Power on/off

1. After assembly, long press "power on" key to turn on the device.
2. When device is powered on, long press "power off" key to turn it off.

6.1.2 Measurement

1. The device is in [Selective interface] after turn on as shown in Fig.2, press "up" or "down" key to select "No",
then press "confirm" key to enter [Testing] interface as shown in Fig.3. (Note: If select "Yes", it will enter [Per-
sonal information] interface to edit personal information, after exit, it will return to [Testing] interface.)
2. In [Testing] interface, breath in fully, seal the lips around the mouthpiece and blast all air out as forcefully as
possible in a minimal amount of time, wait for a few seconds, the device will enter [Main parameter] interface
as shown in Fig.4.
12