Output Function Table; Measure Table For Limits / Analog Outputs - Icar RPC 8BGA Manuel Complet

ICAR PQS
COMMANDS menu It performs one of the operations in the "COMMANDS"menu

23 OUTPUT FUNCTION TABLE

The following table shows all the functions that can be attributed to the OUTn programmable digital inputs.
Each output can be configured so it has a normal or reverse (NOR or REV) function.
Some functions require another numeric parameter, defined in the index (x) specified by parameter P04.n.02.
See menu M04 Master outputs and M06...M13 Slave outputs for more details.
FUNCTION
OFF
ON
Step x
Global alarm 1
Global alarm 2
Global alarm 3
Fan
Manual mode
Automatic mode
Limit threshold LIM x
Pulse PULx
Remote variable REM x
Alarms A01-Axx
Alarms UA1..UAx

24 MEASURE TABLE FOR LIMITS / ANALOG OUTPUTS

The following table lists all measures that can be associated with the limits (menu M20) and outputs (menu M23).
The codes selected in the parameters P20.n.01 and P23.n.02 correspond to the measures below.
To facilitate comparison with the three-phase measures, some 'virtual' measures are provided, that contain the highest
measurements across the three phases. These measures are identified by the presence of the word MAX in the measure code.
Example: If you want to apply a maximum limit of 10% on the content of 5.harmonics in the current of the system, when you have
a three-phase current, set LIM1 with H. I MAX, with channel no. set to 5. The device will consider the highest of the harmonic
content of the 5.o order among the three currents I L1, I L2 and I L3.
Settings:
P20.1.01 = H. I MAX (highest current harmonic among 3 phases)
P20.1.02 = 5 (5.th harmonic)
P20.1.03 = max (compare with max threshold)
P.20.1.04 = 10 (threshold = 10%)
Nr Measure code
00 OFF
01 V L1-N
02 V L2-N
03 V L3-N
04 I L1
05 I L2
06 I L3
07 V L1-L2
08 V L2-L3
09 V L3-L1
10 W L1
11 W L2
12 W L3
13 var L1
14 var L2
15 var L3
16 VA L1
17 VA L2
18 VA L3
19 Hz
20 Cosphi L1
21 Senphi L1
22 Cosphi L2
23 Senphi L2
24 Cosphi L3
25 Senphi L3
DESCRIPTION
Output always de-energized
Output always energized
Capacitor step nr.x
Energised when global alarm 1 is active
Energised when global alarm 2 is active
Energised when global alarm 3 is active
Panel ventilation fan
Active when the regulator is in MAN mode
Active when the regulator is in AUT mode
Output driven by LIM limits
Output driven by PUL pulses
Output is remote controller by REM variable
When the selected Axx alarmi s present, the output ias activated (x=1... alarm number)
When the selected UAx user alarm is present, the output is activated (x=1... 8)
Description
Measure disabled
Phase voltage L1-N
Phase voltage L2-N
Phase voltage L3-N
Phase current L1
Phase current L2
Phase current L3
Phase-to-phase voltage L1-L2
Phase-to-phase voltage L2-L3
Phase-to-phase voltage L3-L1
Active power L1
Active power L2
Active power L3
Reactive power L1
Reactive power L2
Reactive power L3
Apparent power L1
Apparent power L2
Apparent power L3
Frequency
Cosphi L1
Senphi L1
Cosphi L2
Senphi L2
Cosphi L3
Senphi L3
48 / 86
(Cx=1...18)
rev9 jan19