Alarm Properties; Input Function Table - Icar RPC 8BGA Manuel Complet

ICAR PQS

21.2 Alarm properties

Various properties can be assigned to each alarm, including user alarms (User Alarms, UAx):
 Alarm enabled - General enabling of the alarm. If the alarm isn't enabled, it's as if it doesn't exist.
 Retained alarm - Remains in the memory even if the cause of the alarm has been eliminated.
 Operating mode – Operating modes where the alarm is enabled.
 Global alarm 1 -2 -3 - Activates the output assigned to this function.
 Step disconnection mode – Defines whether and how the capacitor steps must be disconnected when the alarm is present.
OFF = no disconnection, SLOW = gradual disconnection, FAST = Immediate disconnection.
 Slave disconnection mode – Defines, for Master-Slave applications, if when this alarm arises, the disconnection is
extended to all the step of the system (GENERAL) or only to the output of the interested panel (LOCAL).
 Inhibition - The alarm can be temporarily disabled by activating an input that can be programmed with the Inhibit function.
 Modem call – The alarm will be signalled remotely by sending a modem call under the conditions and modality defined in
modem parameters.
 No LCD - The alarm is managed normally, but not shown on the display.
 Delay time – Time delay in minutes or seconds before the alarm is generated.
21.3 Alarm properties table
A01 ON OFF A/M
A02 OFF OFF AUT
A03 ON OFF AUT
A04 ON OFF A/M
A05 ON OFF AUT
A06 ON OFF AUT
A07 ON RIT AUT
A08 ON OFF AUT
A09 ON OFF AUT
A10
A11 ON OFF A/M
A12 ON OFF A/M
A13 OFF OFF A/M
A14 OFF OFF A/M
A15 OFF OFF A/M
A16 OFF OFF A/M
A17 OFF RIT A/M
A18 OFF RIT AUT
A19 ON RIT AUT
A20 ON RIT A/M
A21 ON RIT A/M
A22 ON RIT A/M
A23 OFF OFF A/M
UAx OFF OFF A/M

22 INPUT FUNCTION TABLE

The following table shows all the functions that can be attributed to the INPn programmable digital inputs.
Each input can be set for an reverse function (NA - NC), delayed energizing or de-energizing at independently set times.
Some functions require another numeric parameter, defined in the index (x) specified by parameter P14.n.02.
See menu M14 Programmable inputs for more details.
FUNCITON DESCRIPTION
OFF Disabled input
Configurable Free user configurable input INPx. Used for instance to generate a user alarm UA or to count on a CNT counter.
Automatic mode When active, switches system to AUT mode
Manual mode When active, switches system to MAN mode
Select cosphi setpoint x When active, selects the cosphi setpoint x (x=1...3).
Keyboard lock Locks front keyboard.
Settings lock Locks access to setup menu and command menu.
Alarm Inhibition Selectively disables alarms that have inhibit property set to ON.
DEFAULT ALARM PROPERTIES
GLB1 OFF OFF OFF
GLB1 OFF OFF OFF
GLB1 OFF OFF IMM
GLB1 OFF OFF OFF
GLB1 OFF OFF IMM
GLB1 OFF OFF IMM
GLB1 OFF OFF IMM
GLB1 OFF OFF SLOW
GLB1 OFF OFF IMM
GLB1 OFF OFF IMM
GLB1 OFF OFF SLOW
GLB1 OFF OFF IMM
GLB1 OFF OFF IMM
GLB1 OFF OFF IMM
GLB1 OFF OFF IMM
GLB1 OFF OFF IMM
GLB1 OFF OFF IMM
GLB1 OFF OFF IMM
GLB1 OFF OFF OFF
OFF
GLB1 OFF OFF
OFF
GLB1 OFF OFF
GLB1 OFF OFF OFF
OFF OFF OFF OFF
47 / 86
GEN OFF OFF
GEN OFF OFF
GEN OFF OFF
GEN OFF OFF
GEN OFF OFF
GEN OFF OFF
LOC OFF OFF
GEN OFF OFF
GEN OFF OFF
NOT USED
LOC OFF OFF
LOC OFF OFF
LOC OFF OFF
LOC OFF OFF
LOC OFF OFF
LOC OFF OFF
LOC OFF OFF
LOC OFF OFF
GEN OFF OFF
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
GEN OFF MDM
GEN OFF OFF
rev9 jan19
OFF 15 ●
OFF 5 ●
OFF 30
OFF 60
OFF 60
OFF 15 ●
OFF 60
OFF 3 ●
OFF OFF
OFF 3
OFF 3 ●
OFF 3 ●
OFF 3 ●
OFF 3 ●
OFF 3 ●
OFF 60
OFF 60
OFF 30
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF OFF
●
●
●
●
●
●
●
●