Display Page Navigation - Icar Rpc 8Bga Manuel Complet

ICAR PQS
7

DISPLAY PAGE NAVIGATION

Keys ▲and ▼scroll through the measurements pages one by one. The title bar shows the current page.
Some measurements may not be shown depending on the system programming and connections. Sub-pages, which can be
opened with key ►, are also available on some pages (displaying voltages and currents in the form of bar graphs, for example).
The user can specify which page and which sub-page the display should return to automatically when no keys have been pressed
for a certain time. The system can also be programmed so the display remains were it was last. You can set this function in menu
M01 – Utility.
7.1 Table of display pages
PAGES
Home page
Push ▼
Voltage and current
Push ▼
Power
Push ▼
Temperature
Push ▼
Voltage/current distortion
and frequency value
Push ▼
Harmonics (voltage and
current)
Push ▼
Waveforms (voltage and
current)
Push ▼
EXAMPLE
Present
CosPhi
Weekly true
power factor
kvar needed to
reach setpoint
System
nominal voltage
True power factor
Page Title. If P01.09 is set, then
the plant description will be
shown here.
Voltage and current total
Aut/Man
harmonic distortion
Mode
30 / 86
rev9 jan19
Step status
Black = On
Gray = Off
Fan status
Black = On
Gray = Off
Panel temperature
System nominal
current
Max temperature
peak with date
Alarm threshold