Handling Flour And Similar Products; Cleaning And Servicing; Safety Instructions - cookmax AP10 Manuel D'installation, Utilisation Et Entretien

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

In case it was necessary to add some ingredients during the processing, please proceed as
follows:
1 – Stop the appliance;
2 – Open the bowl's protection grill;
3 – Add the desired ingredients;
4 – Close the bowl's protection grill;
5 – Switch ON the appliance again.
WARNING!
Check that the bowl and the tool have ben fitted correctly before switching ON the appliance.
Putting the appliance into operation without having correctly positioned the bowl may result in
the risk of cutting, slicing and trapping. Also take care during the operations for fitting/removing
the tools and bowl, and for raising/lowering the bowl that nobody can place their hands or other
parts of the body in contact with the appliance to prevent any crushing/trapping in the bowl's
lifting mechanism or in other moving parts.

5.5 Handling flour and similar products

To minimize the dust emission of flour and similar products, it is recommended to:
1.
carefully handle the packaged products while minimizing the height above the base of
the bowl from which they are poured;
2.
carefully open the packages in the lower part of the bowl in order to pour down the
flour without creating a cloud of dust.
3.
Use the PPE (masks) for the respiratory tract protection.

6. Cleaning and servicing

6.1 Safety instructions

Disconnect the appliance from the mains electricity supply (pull out the plug from the
socket) before cleaning the appliance or starting any servicing or repair activities, and, if it
has been used in the last 15-20 minutes, wait until the motor cools down completely.
Do not use aggressive detergent products and take care to ensure that water does not enter
the control panel or inside the appliance.
To prevent electric shocks, never immerse the appliance, the power supply cable or the plug
in water or any other liquid.
WARNING!
The appliance was not designed to be cleaned:
-
using a water jet;
-
using a high-pressure water jet;
-
by plunging it in water or another liquid.
31
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
- 31 -

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ap20Ap30Ap40Ag10Ag20Ag30 ... Afficher tout

Table des Matières