Disposal; Installation And Operation Of Appliance; Electrical Connection (Plug-Socket) - cookmax AP10 Manuel D'installation, Utilisation Et Entretien

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

storage, it is necessary to comply with the markings regarding the positioning and storage of the
packaging.
The packaged appliance must always be stored in the following conditions:
do not store outdoors;
store in a dry place, protecting it from dust and at a temperature of between +0°C and
+50°C and a relative humidity of between 30% and 80%;
do not expose to the action of aggressive agents;
protect from the action of the sun's rays;
avoid impacts;
if stored for a prolonged period of time (more than three months), regularly check the
condition of all the packaging.

4.4 Disposal

At the end of the appliance's working life it must be disposed of in accordance with the current local
and national regulations.
The appliance contains electrical and electronic components, referred to as "Waste of electrical and
electronic equipment" (WEEE).
In accordance with Italian Legislative Decree 49/2014, which implements Directive 2012/19/EU, the
Manufacturer requires that the appliance be disposed of at authorised collection centres, to avoid
potential affects on the environment and to protect human health.
The symbol shown alongside indicates the need to dispose of the appliance according to
the WEEE requirements when it is scrapped.
WARNING!
To avoid any unauthorised use and the related risks, ensure that the appliance cannot be
reactivated before disposing of it. To do this, the appliance must be disconnected from the
power supply and the power supply cable must be cut.

5. Installation and operation of appliance

5.1 Electrical connection (plug-socket)

HAZARD RISK! Live components!
The single-phase models are equipped with an electric cable with a Shucko plug. The three-phase
models are equipped with an electric supply cable without any plug: in this case, a three-pase (4-
pole without neutral) 16A plug, standard IEC60309, should be installed. This operation must be
carried out by a qualified technician in possession of all the technical and professional
requirements as by the laws in force in the country where the appliance is installed.
27
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
- 27 -

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ap20Ap30Ap40Ag10Ag20Ag30 ... Afficher tout

Table des Matières