Installation Of Optical Strain Gages With Potting (Standard); Positioning Optical Strain Gages - HBM K-OP Instructions D'emploi

Installing optical strain gages
3

Installation of optical strain gages with potting (Standard)

3.1 Positioning optical strain gages

The optical strain gage is carefully packed in a protective wallet inside a box.
Please note the following unpacking steps in order not to damage the glass
fibers of the optical strain gage, see Fig. 3.1.1 to 3.1.4.
Example of a package for chains with 1 or 2 optical strain gages. Packages
for chains with more than 2 optical strain gages differ from the package shown
here.
Fig. 3.1.1: Packed optical strain gage with installation aid
Fig. 3.1.2: Unpack the optical strain gage with installation aid
A2397-3.2 en/de/fr
7
HBM