29
Installing optical strain gages
4.3 Installing strain gages with X60 superglue
A mask is required when applying X60 superglue. First fix an additional
adhesive strip parallel to the optical strain gage on its Teflon
installation aid.
Fig. 4.3.1: Making a mask
With a scalpel, cut the fixing adhesive strip close to the optical strain gage.
Fig. 4.3.2: Making a hinge from adhesive tape
Attach a further piece of adhesive tape parallel to the optical strain gage.
A2397-3.2 en/de/fr
HBM