The Door; Preparations For The Installation; Mounting The Dbl-S Drive Unit; Determine The Installation Position - GILGEN KABA doorboy DBL-S Instructions De Montage Et D'exploitation

2.1.2

The door

- Has a fixed stop piece been installed for the OPEN position of the door?
- Does the door move smoothly and steadily on the entire travel distance?
- Is it possible to fasten the door driver on the door?
2.2

Preparations for the installation

- Mount the EMS safety edging (option) to the door, according to the separate instructions "Installation instructions
building site, EMS", if there is no STROZU option. Lay out the connection cable in the direction of the branch box
(installed by customers) of the flexible power supply system.
- Remove the hood of the drive unit. For this purpose, loosen the hexagon countersunk bolts with double nip on
both sides of the hood. Then pull the hood sideways (towards the outside) and lift it off.
2.3

Mounting the DBL-S drive unit

2.3.1

Determine the installation position

Determine the installation position in function of the building situation and of the lintel height.
A) Drive head(10) above the opened door. Fig. 2
B) Drive head(10) behind the opened door. Fig. 3
10
0552-999-04a_08.2001.p65
10
0552-999/04a
DBL-S
6-19
11
11
Fig. 2
Fig. 3