Publicité
ELECTRIC STARTING SYSTEM
2
(TT-R125E/TT-R125LWE)
5. Measure:
• Brush length a
6. Measure:
• Brush spring force
2
ASSEMBLY
1. Install:
• Brush spring 1
• Brush 2
1
2. Install:
• Armature assembly 1
NOTICE
Be careful not to damage the brush during
installation.
6-15
Out of specification → Replace.
Brush length wear limit:
3.5 mm (0.14 in)
Fatigue/out of specification → Replace as
a set.
Brush spring force:
5.52 ~ 8.28 N
(560 ~ 840 g, 19.8 ~ 29.7 oz)
Install while holding down the brush using
a thin screw driver.
–
+
ELEC
Publicité
Chapitres
