Publicité
STEERING
4. Install:
• Lower bracket 1
TIP
Apply the lithium soap base grease on the
bearing.
5. Install:
• Lower ring nut 1
• Rubber washer
• Upper ring nut
• Special washer
Tighten the ring nut using the steering nut
wrench 2.
TIP
Install the lower ring nut with its larger chamfered
portion a facing downward.
Refer to "STEERING HEAD INSPECTION
AND ADJUSTMENT" section in the
CHAPTER 3.
6. Check the steering shaft by turning it lock to
lock. If there is any binding, remove the
steering shaft assembly and inspect the
steering bearings.
7. Install:
• Upper bracket 1
• Steering stem nut 2
• Starter knob bracket 3
TIP
Do not tighten the steering stem nut yet.
8. Install:
• Front forks 1
TIP
• Temporarily tighten the pinch bolts (lower
bracket) 2.
• Do not tighten the pinch bolts (upper bracket)
yet.
5-56
CHAS
20 Nm (2.0 m · kg, 14 ft · lb)
10 Nm (1.0 m · kg, 7.2 ft · lb)
Publicité
Chapitres
