Publicité
A
1
B
1
FRONT FORK
HANDLING NOTE
TIP
The front fork requires careful attention. So it is
recommended that the front fork be maintained
at the dealers.
NOTICE
To prevent an accidental explosion of air, the
following instructions should be observed:
The front fork with a built-in piston rod has
a very sophisticated internal construction
and is particularly sensitive to foreign mate-
rial.
Use enough care not to allow any foreign
material to come in when the oil is replaced
or when the front fork is disassembled and
reassembled.
EC553000
REMOVAL POINTS
Cap bolt
1. Remove:
• Cap bolt 1
From the inner tube.
TIP
Before removing the front fork from the machine,
loosen the cap bolt.
A TT-R125/TT-R125E/TT-R125LW
B TT-R125LWE
Inner tube
1. Remove:
• Dust seal 1
• Stopper ring 2
Using slotted-head screwdriver.
NOTICE
Take care not to scratch the inner tube.
2. Remove:
• Bolt (damper rod)
• Damper rod
• Inner tube
• Oil flow stopper
• Piston metal
TIP
Use the damper rod holder 1 and the T-handle
2 to lock the damper rod.
5-34
CHAS
Publicité
Chapitres
