Publicité
FRONT WHEEL AND FRONT BRAKE
(TT-R125/TT-R125E)
Front wheel
1. Install:
• Wheel bearing 1
• Spacer 2
• Wheel bearing 3
• Oil seal 4
TIP
• Apply the lithium soap base grease on the
wheel bearing and oil seal lip when installing.
• Install the wheel bearing so that the enclosed
side is facing outward.
• Use a socket that matches the outside
diameter of the race of the bearing.
• Left side of wheel bearing shall be installed
first.
• Install the oil seal with its manufacture's
marks or numbers facing outward.
NOTICE
Do not strike the inner race of the bearing.
Contact should be made only with the outer
race.
2. Install:
• Brake shoe plate assembly
• Collar set 1
TIP
Apply the lithium soap base grease on the oil
seal lip.
3. Install:
• Front wheel
TIP
Make sure that the slot a on the brake shoe
plate with the stopper b on the front fork outer
tube.
4. Install:
• Wheel axle 1
5-6
CHAS
New
Publicité
Chapitres
