Yamaha TT-R125Y 2009 Manuel D'atelier page 198

REAR SHOCK ABSORBER REBOUND DAMPING
FORCE ADJUSTMENT (TT-R125LWE)
b
a
1
3-25
5. Tighten:
• Locknut
42 Nm (4.2 m · kg, 30 ft · lb)
6. Install:
• Left side cover
7 Nm (0.7 m · kg, 5.1 ft · lb)
EC36N014
REAR SHOCK ABSORBER REBOUND
DAMPING FORCE ADJUSTMENT
(TT-R125LWE)
1. Adjust:
• Rebound damping force
By turning the adjuster 1.
Stiffer a → Increase the rebound
damping force.
(Turn the adjuster 1 in.)
Softer b → Decrease the rebound
damping force.
(Turn the adjuster 1 out.)
Extent of adjustment:
Maximum
Fully turned in
position
• STANDARD POSITION:
This is the position which is back by the
specific number of clicks from the fully turned-
in position.
Standard position:
About 12 clicks out
NOTICE
Never go beyond the maximum or minimum
adjustment positions.
INSP
ADJ
Minimum
20 clicks out
(from maximum
position)