Storage; Disposal; What If There Are Problems; Technical Specifications - Beurer TL 41 Mode D'emploi

8. Storage

If you are not going to use the device for an extended period of time, disconnect it and store it in a dry place, out
of the reach of children.
Follow the storage instructions provided in the "Technical data" chapter.

9. Disposal

For environmental reasons, do not dispose of the device in the household waste at the end of its useful
life. Dispose of the unit at a suitable local collection or recycling point. Dispose of the device in accor-
dance with EC Directive – WEEE (Waste Electrical and Electronic Equipment). If you have any questions,
please contact the local authorities responsible for waste disposal.

10. What if there are problems?

Problem Possible cause
Device does not On/off button switched off
light up
No electricity
No electricity
LEDs have reached the end of their service life.
LEDs faulty.

11. Technical specifications

Type
Model
Dimensions (WHD)
Cable length
Weight
Light
Illuminance
Mains connection
Operating conditions
Storage conditions
Transport conditions
Product classification
Location of emission aperture
Color temperature of LEDs
LED lifetime
Risk group of light source equipment
Product lifetime
MDLEDV2
TL41
270 x 207 x 80 mm
max. 2.000 mm
approx. 645 g
LEDs
10,000 lux (at a distance of approx. 20 cm)
220-240 V ~, 50 Hz, 0.3 A
0°C to +40°C, 30-90% relative humidity,
700-1060 hPa ambient pressure
-10°C to +60°C, 30-90% relative humidity,
700-1060 hPa ambient pressure
-10°C to +60°C, 30-90% relative humidity,
700-1060 hPa ambient pressure
Protection class II, IP21, no AP or APG, continuous operation
Screen (around approx. 440 cm
6.500 Kelvin
approx. 10,000 hours
risk group 1 classified by IEC 60601-2-57: 2011
5 years
15
Solution
Switch on the on/off button.
Connect the mains plug correctly.
The mains cable is defective. Contact
customer services or your retailer.
For repairs, please contact Customer
Services or an authorised retailer.
)
2