Interior View; Configuration Switches - Mennekes AMTRON Start Instructions D'installation

3.5.2 Interior view

Fig. 6: Interior view of rear enclosure part (example)
1 Counter
2 Circuit breaker (CB)
3 Multi-function actuator
4 Charging contactor
5 System monitoring
6 Cable glands
The charging station contains all required components for
controlling the charging process and communicating with the
vehicle.
The design of the components depends on the version of the
charging station.
7
7 Controller (CPX
communication box)
8 Residual current circuit
breaker (RCCB)
9 Mains adapter
0 Terminals for mains
connection
k Actuator control
Fig. 7: Interior view of front panel (example)
1

Configuration switches

2 Actuator (plug interlock)
The configuration switches are used to set the charging
current upper limit and the colour scheme of the LED info
bar.
 See Chapter 6.1 "Setting the configuration switches" on
page 15.
The actuator interlocks the charging plug in the charging
socket during the charging process (applies only to charging
stations with charging socket Type 2).
3 Socket insert