Setting The Cooktop; Switching The Cooktop On And Off; Hibernate Mode; Setting A Cooking Position - Gaggenau CX 491 610 Notice D'utilisation

Setting the cooktop

In this chapter you will learn how to adjust the cooking
zones. In the setting chart you will find heat levels and
cooking times for various dishes.

Switching the cooktop on and off

Use the main switch to switch the cooktop on and off.
To switch on: touch the
above the main switch lights up. After a short
activation time, the cooktop is ready for operation.
touch the # symbol. The indicator in the
To switch off:
display switches off. All cooking positions are
switched off. Hibernate mode is activated. See
section Hibernate mode.
The heat indicator remains lit until the cooking
positions have cooled down sufficiently.
Note: The cooktop switches off automatically if all
cooking positions have been switched off for more
than 60 seconds and you do not make any settings on
the touch display.

Hibernate mode

As soon as you switch off the cooktop, Hibernate
mode is activated for a set duration. The lamp above
the main switch flashes. Only after this duration has
passed does the cooktop switch off completely.
During Hibernate mode, you can switch the appliance
on again using the main switch. The appliance is
immediately ready for use.
Note: To find out how to change the duration of the
Hibernate mode, see section Options menu.
10
# symbol. The indicator

Setting a cooking position

Use the scroll function to set the desired power level.
Power level 1.0 = Lowest power
Power level 9.0 = Highest power
Each power level has an intermediate level. This is
identified with x.5.
Note: To find out how to deactivate the intermediate
levels, see section Options menu.
Setting the power level
The cooktop must be switched on.
1 Place cookware on the cooking surface.
Touch the # symbol of the cooking position in
2
the display. 0.0 lights up in the display.
3 In the next 4 seconds, slide your finger up and set
the desired power level.



K
PLQ


Switching off the cooking position
Slide your finger down until 0.0 appears. The cooking
position switches off and appears as a detected
cooking position after approx. 4 seconds.



K
PLQ