Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
3.7 Combining several Vario appliances
If you want to combine several Vario appliances, the
1.
connecting strip VA 420 000/001/010/011 is required.
You can purchase it separately as a special accessory.
Consider additional space requirement for the connect-
ing strip between the appliances when making the
cutout. Refer to the Installation Instructions of
VA 420 000/001/010/011.
The appliances can also be installed in individual
cutouts. Ensure a minimum distance of 2" (51 mm) be-
tween the appliances.
When combining appliances with appliance cover and
2.
appliances without appliance cover, you can use the ap-
pliance extensions VA 450 110/401/600/800/900 to bal-
ance out dimension differences, if required.
4 Installation procedure
Installation procedure
Follow these instructions to install the cooktop into the
Installation procedure
countertop.
CAUTION
Sharp edges.
Use protective gloves when installing the appliance.
▶
CAUTION
The appliance is heavy.
It is recommended that two people install this appliance.
▶
4.1 Installing the heat shield
For safety reasons, the heat shield must be properly in-
stalled when closed cabinets are used. This prevents com-
ponents from overheating as a result of the recirculation of
hot air from the cooktop. The heat shield is the same width
as the cooktop.
CAUTION
Sharp edges.
Use protective gloves when installing the heat shield.
▶
Requirement: You have unpacked the cooktop.
For shipping, the heat shield is screwed to the bottom of
▶
the cooktop. Unscrew the fastening screw on heat
shield.
The heat shield will be able to rotate freely.
a
4.2 Securing the cooktop to the countertop
The cooktop must be secured from below using the hold-
down brackets provided, so it does not slip.
Place the cooktop face down on a soft underground.
1.
Installation procedure en-us
9
Publicité
Chapitres
Table des Matières
